Category Archives: blog
e cycle electric bike luggage carrier
A luggage carrier, also commonly called a rack,is a device attached to a bicycle to which cargo or panniers can be attached. This is popular with utility bicycles and touring bicycles. Bicycle luggage carriers may be mounted on the front or rear of a bicycle. The rear mount is more common. Racks on the front are mostly reserved for utility and freight bicycles. A special type of front rack is a low rider which is mainly used for bicycle touring.
mid drive electric mountain bike hub gear
A hub gear,internal-gear hub,or just gear hub is a gear ratio changing system commonly used on bicycles that is implemented with planetary or epicyclic gears. The gears and lubricants are sealed within the shell of the hub gear, in contrast with derailleur gears where the gears and mechanism are exposed to the elements. Changing the gear ratio was traditionally accomplished by a shift lever connected to the hub with a Bowden cable, and twist-grip style shifters have become common.
pedal bike with electric motor gear case
A gear case, also known as a chain case or chainguard, is an enclosure for the bicycle chain and sprocket assemblages commonly employed by utility bicycles. It serves to protect the cyclist from being soiled or trapped in the chain rings and tends to fully enclose the drive train. It may also contain an oil bath to keep the chain lubricated. Modern examples are usually moulded in plastic. Similar devices may be found in connection with chains used on larger vehicles and machinery.
electric folding motorbike fork end
A fork end,fork-end,or forkend is a slot in a bicycle frame or bicycle fork where the axle of a bicycle wheel is attached. A dropout is a type of fork end that allows the rear wheel to be removed without first derailing the chain. Track bicycle frames have track fork ends, on which the opening faces rearwards. Because they do not have dropouts, the chain must be derailed from the sprocket before the rear wheel can be removed from a typical track bike. Some single-speed bicycles intended for street or trail use are also equipped with track fork ends instead of dropouts.
e road electric bike gear-shifting system
An electronic gear-shifting system is a method of changing gears on a bicycle, which enables riders to shift with electronic switches instead of using conventional control levers and mechanical cables. The switches are connected by wire or wirelessly to a battery pack and to a small electric motor that drives the derailleur, switching the chain from cog to cog. An electronic system can switch gears faster, and because the system does not use Bowden cables and can calibrate itself, it may require less maintenance.
small electric bike derailleur gears
Derailleur gears are a variable-ratio transmission system commonly used on bicycles, consisting of a chain, multiple sprockets of different sizes, and a mechanism to move the chain from one sprocket to another.Although referred to as gears in the bike world, these bicycle gears are technically sprockets since they drive or are driven by a chain, and are not driven by one another.
high power electric bike crankset
The crankset (in the US) or chainset (in the UK), is the component of a bicycle drivetrain that converts the reciprocating motion of the rider’s legs into rotational motion used to drive the chain or belt, which in turn drives the rear wheel. It consists of one or more sprockets, also called chainrings or chainwheels attached to the cranks, arms, or crankarms to which the pedals attach. It is connected to the rider by the pedals, to the bicycle frame by the bottom bracket, and to the rear sprocket, cassette or freewheel via the chain.
electric folding mini bike cogset
On a bicycle, the cogset or cluster is the set of multiple sprockets that attaches to the hub on the rear wheel. A cogset works with a rear derailleur to provide multiple gear ratios to the rider. Cogsets come in two varieties, freewheels or cassettes, of which cassettes are a newer development. Although cassettes and freewheels perform the same function and look almost the same when installed, they have important mechanical differences and are not interchangeable.
small folding electric bicycle braze-on
The term “braze-on” comes from when these parts would have been brazed on to steel frame bicycles. Braze-ons continue to be so called even though they may be welded, glued, riveted, or moulded into the frame material, depending on the material itself and the connection method used elsewhere on the frame.
foldable electric bike bottom bracket
The bottom bracket on a bicycle connects the crankset (chainset) to the bicycle and allows the crankset to rotate freely. It contains a spindle that the crankset attaches to, and the bearings that allow the spindle and cranks to rotate. The chainrings and pedals attach to the cranks. The bottom bracket fits inside the bottom bracket shell, which connects the seat tube, down tube and chain stays as part of the bicycle frame.
English
Afrikaans
Shqip
አማርኛ
العربية
Հայերեն
Azərbaycan dili
Euskara
Беларуская мова
বাংলা
Bosanski
Български
Catal 
Cebuano
Chichewa
简体中文
繁體中文
Corsu
Hrvatski
Čeština
Dansk
Nederlands
Esperanto
Eesti
Filipino
Suomi
Français
Frysk
Galego
ქართული
Deutsch
Ελληνικά
ગુજરાતી
Kreyol ayisyen
Harshen Hausa
Ōlelo Hawaiʻi
עִבְרִית
हिन्दी
Hmong
Magyar
Íslenska
Igbo
Bahasa Indonesia
Gaelige
Italiano
日本語
Basa Jawa
ಕನ್ನಡ
Қазақ тілі
ភាសាខ្មែរ
한국어
كوردی
Кыргызча
ພາສາລາວ
Latin
Latviešu valoda
Lietuvių kalba
Lëtzebuergesch
Македонски јазик
Malagasy
Bahasa Melayu
മലയാളം
Maltese
Te Reo Māori
मराठी
Монгол
ဗမာစာ
नेपाली
Norsk bokmål
پښتو
فارسی
Polski
Português
ਪੰਜਾਬੀ
Română
Русский
Samoan
Gàidhlig
Српски језик
Sesotho
Shona
سنڌي
සිංහල
Slovenčina
Slovenščina
Afsoomaali
Español
Basa Sunda
Kiswahili
Svenska
Тоҷикӣ
தமிழ்
తెలుగు
ไทย
Türkçe
Українська
اردو
O‘zbekcha
Tiếng Việt
Cymraeg
isiXhosa
יידיש
Yorùbá
Zulu